The 2011-2014 Mustang GT in stock form has an easy to fix flaw that will free up a few horsepower and is inexpensive to do. We have heard this problem happening to many 2011-2014 Mustang GT owners and it has happened off and on with our 2012 Mustang GT, so we found an easy solution that frees up some lost horsepower as well. Just about all Mustang GT owners experience the 5.0 motor cutting out, hesitating, or actually stalling in hot weather driving. The cause if all else is functioning properly, is your fuel is getting way too hot!
You know how hot it gets under the hood of your Mustang GT, it’s very hot. Now your fuel line comes up from the drivers side, then along the top side of the motor running straight behind your throttle body towards the middle of your motor to your injectors. This route for the fuel lines allows the fuel to get very hot and causes the cutting out, stalling, hesitation and of course loss of horsepower. We took a look at this problem and applied an old racers trick to protect the fuel lines better from the high heat. After we did this very simple easy procedure on our 2012 Mustang GT, it does not hesitate, cut out, or stall in hot weather driving and it is noticeably more powerful in hot weather driving versus before protecting those hot fuel lines.
To do this easy fuel line protection procedure on your 2011-2014 Mustang GT, start by removing your engine shock tower brace if you have one, then remove your engine cover by pulling it straight up. Now you will see your fuel line come up the back side of the motor on the drivers side, then along the top of your motor going just behind the throttle body towards the middle of the motor splitting into two sections, one for passenger side and one for drivers side fuel rail/injectors. You want to start at the drivers side back of the motor and cover the fuel lines as best you can with heat shielding material/tubing, do this all the way to the top of motor area where the fuel lines split into two. This will dramatically reduce the temperature of the fuel entering the motor and cooler fuel makes more power.
The heat shielding material can be purchased at most speed shops in a heat shield tubing type cover used for covering fuel lines, wires etc. Or you can just buy the basic plastic tubing to cover wires etc and then get some heat shield special tape and wrap those tubing covers yourself, then just cut the slit all the way down with an exacto knife or other, install around your fuel lines and your done. You would be amazed at the difference this procedure can make and of course it will help to further protect those important fuel lines. This is an easy to do worthwhile trick that all of you 2011-2014 Mustang GT owners can benefit from.
Below are a few more great articles you should read:
Lotto Guy Lottery System Is No Joke
Lotto Guy Lottery System Formula Works
Smart Play Proven Winning Lotto Wheels
Lotto System Reviews – The Truth!
